In the actual use of equipment such as polishing machine, there are still a lot of considerations, of course, because such a device is very popular in the market, so in the whole process of use, the daily operation and maintenance of the way is the focus of many people's attention, polishing machine in practice. What kind of maintenance will be used?
When the whole polishing machine works for a relatively long time, the surface of the polishing machine may be too hot due to friction, so it is often prone to scalding. In this case, it is necessary to cool down in time, and the polishing machine surface needs to be cleaned before working every day. It is necessary to wax, and in the waxing process to ensure that there is no dust, and to control the relevant pressure, otherwise, there will be no problem of excessive power, but also need to pay attention to, if the equipment is heated, it may lead to burnout, rotating the need to do a good job of lubrication.
Therefore, when the polisher is tilted, the entire rear wheel needs to be stored on the ground, and the power cord needs to be put in place, to wipe all the surface of the power cord clean, this time to check the external surface of the power line is not damaged, to all the polisher's installation on a regular basis. It is very important to check the tightness of the screw or belt according to the actual situation, and in the actual polishing process, we should have a comprehensive understanding of each place. Of course, different parts in the maintenance process, naturally have their own maintenance. We must pay special attention to this method.