First, the operation of the front-hand machine method of work will cover the upper shoe last, and make the top of some of the upper into the opening of the first claw of the list, step on the start switch (left foot switch) so that the first claw of the list clips the upper.
2. Put the rest of the upper apart into the opening of 2.3.4 claws, press the start switch again, then loosen the 2.3.4 claws to clamp the upper, and then stand up to tighten the upper.
3. Check the upper tension, if not to achieve the desired effect, you can use the knee touch half-back switch, adjust the position of the shoe last under the upper, the front machine to make the upper tension to achieve the best effect.
Fourth, press the start switch again, or both hands together to pull the two control handles, the seat down (or sweeper forward to the pre-knot position), the equipment will actively end the action.
Five. After a working cycle is completed, all parts of the machine will go back to the initial state.
6. If the operation is improper or the equipment is abnormal in the process of work, step on the step-back pedal to make the front machine equipment return to its original state.