Different characteristics of pneumatic shoe upper shaping machine and automatic spraying machine
Characteristics of pneumatic shoe upper shaping machine
Cylindrical slideway is adopted, and the knife action is stable.
The integral upper press cutter is operated in two stages. The upper shaping machine is safe to operate and the center of the upper is positioned accurately.
Depression depth of the upper can be selected according to the size of the upper.
Double bend top knife is optional.
The setting of switch point and instep point can be completed simultaneously by one plastic operation.
Shaping radian of upper knife can be customized according to shoe pattern provided by customers.
Characteristics of automatic spraying machine
Applicable to any natural rubber, water-based adhesive.
Simple operation, uniform spraying, adjustable spraying area and glue volume.
Save glue, electricity and manpower, improve quality and quality, and reduce costs.
Machinery equipment shoe upper shaping machine should give priority to the use of easy-to-adjust working seats to increase the comfort and ease of operation of operators. The requirements of working seats are as follows: the height of the seat plane should be adjusted to enable the whole foot to be placed on the ground or on the foot-rest board, the angle between the upper and lower legs should be slightly less than 90 degrees, the seat plane should support 3/4 of the full length of the arms to the thighs, and the front edge of the seat and chair should not be touched. A lower leg. The inclination angle of the seat plane should be adjusted to the level if the sitting posture is changed frequently; the size and shape of the working seat should be adjusted according to the working position and task; the height of the backrest should be adjusted to the waist protrusion of the support person, that is, the height of the 4th to 5th lumbar vertebrae of the human body; the armrest should be adjusted to make the forearm have the largest shelf area possible, while the height of the armrest should be adjusted to the height of the armrest. Adjust to the lower edge of the elbow when the upper arm is naturally drooping in the sitting position.